Special ceramic based resin for dental model printing
Works with any type of DLP or LED/LCD 3D printer
- High dimensional stability and high accuracy
- Special opaque/mat texture
- Fast curing properties for fast printing
- Produced in 1kg net bottles
Material Properties
Value
Standard
Tensile strength
26.2 MPa
ASTM D638
Flexural strength
99 MPa
ASTM D790-02
Flexural modulus
2640 MPa
ASTM D790-02
Shore Hardness
76.75
ASTM D2240
Density
1.1 g/cm3 at 23oC
ASTM D1475
Viscosity
200 - 225 mPa.s at 23oC
DIN 53211-4
Color
Light Pink
Printer Settings (Click Here)
*Store the PowerResins Model bottle in dark and moisture free place at room temperature (20-24 °C). *Do not forget shaking the resin well before use. *If your printer has heater, you can set the temperature at 32 °C. Optionally, you can heat up your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.
CE certified Class IIa biocompatible resin
Works with any type of DLP or LED/LCD 3D printer
- Compatible with natural dental aesthetics (A1, B1 shades)
- Exceptional breakage and high wear resistance for daily usage
- Almost as durable as PMMA in Inlay, Onlay and Crown-Bridge applications
- Low viscosity and easy to clean
- Perfectly compatible with syringe composites
Material Properties
Value
Standard
Tensile strength
66.5 MPa
ASTM D638
Flexural strength
126 MPa
ASTM D790-02
Flexural modulus
2980 MPa
ASTM D790-02
Shore Hardness
85.7
ASTM D2240
Density
1.14 g/cm3 at 23oC
ASTM D1475
Viscosity
2500 - 3000 mPa.s at 23oC
DIN 53211-4
Color
Light (A1, B1) and Medium (A2, A3)
Printer Settings (Click Here)
*Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C). *Do not forget shaking the resin well before use. *If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.
