CE certified biocompatible Class IIa material
Works with any type of DLP or LED/LCD 3D printer
- Design, print and finish perfect removal dentures
- Perfect fit and suitable with artificial teeth
- Exceptional mechanical properties
- Color stability, odorless and tasteless
- MMA-free, Class IIa biocompatible resin
Material Properties
Value
Standard
Flexural strength
114 MPa
ASTM D790-02
Flexural modulus
2890 MPa
ASTM D790-02
Density
1.12 g/cm3 at 23oC
ASTM D1475
Viscosity
2300 - 2400 mPa.s at 23oC
DIN 53211-4
Shore Hardness
83.6
ASTM D2240
Color
Opaque Pink
Printer Settings (Click Here)
*Store the PowerResins Denture bottle in dark and moisture free place at room temperature (20-24 °C). *Do not forget shaking the resin well before use.
CE certified biocompatible Class IIa material
Works with any type of DLP or LED/LCD 3D printer
- Flexible resin to print soft gingival masks for the model prints
- High dimensional stability
- Easily trimmed to reach optimal fitting for the implant models
- Natural gingiva colour
Printer Settings (Click Here)
*Store the PowerResins Gingiva bottle in dark and moisture free place at room temperature (20-24 °C).
*Do not forget shaking the resin well before use.
CE certified biocompatible Class IIa material
Works with any type of DLP or LED/LCD 3D printer
- Flexible resin to print soft gingival masks for the model prints
- High dimensional stability
- Easily trimmed to reach optimal fitting for the implant models
- Natural gingiva colour
Printer Settings (Click Here)
*Store the PowerResins Gingiva bottle in dark and moisture free place at room temperature (20-24 °C).
*Do not forget shaking the resin well before use.
Special ceramic based resin for dental model printing
Works with any type of DLP or LED/LCD 3D printer
- High dimensional stability and high accuracy
- Special opaque/mat texture
- Fast curing properties for fast printing
- Produced in 1kg net bottles
Material Properties
Value
Standard
Tensile strength
26.2 MPa
ASTM D638
Flexural strength
99 MPa
ASTM D790-02
Flexural modulus
2640 MPa
ASTM D790-02
Shore Hardness
76.75
ASTM D2240
Density
1.1 g/cm3 at 23oC
ASTM D1475
Viscosity
200 - 225 mPa.s at 23oC
DIN 53211-4
Color
Light Pink
Printer Settings (Click Here)
*Store the PowerResins Model bottle in dark and moisture free place at room temperature (20-24 °C). *Do not forget shaking the resin well before use. *If your printer has heater, you can set the temperature at 32 °C. Optionally, you can heat up your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.
PowerResins Primer is a resin that has very strong adhesion properties and designed to use for any LCD, DLP and SLA technology printers who has adhesion issues with
Instructions
2-3 drop on your build platform
Make sure to spread drops all around the build platform as a thin layer
Cure 2-3 mins before starting to print
Avoid any adhesion issues
Fast curing properties for fast printing
Easy solution to stick parts to the build platform
Produced in 30 g net bottles
Transparent biocompatible Class I material
Works with any type of DLP or LED/LCD 3D printer
- High flexural strength and resistant
- Transparent, odorless and tasteless
- Can be sterilized using standard autoclave protocols
- Low cost, fast return on investment
Material Properties
Value
Standard
Tensile strength
41.1 MPa
ASTM D638
Flexural strength
104.2 MPa
ASTM D790-02
Flexural modulus
2800 MPa
ASTM D790-02
Density
1.1 g/cm3 at 23oC
ASTM D1475
Viscosity
520 - 540 mPa.s at 23oC
DIN 53211-4
Color
Clear Yellow
Printer Settings (Click Here)
*Store the PowerResins SG bottle in dark and moisture free place at room temperature (20-24 °C). *Do not forget shaking the resin well before use.
CE certified Class IIa biocompatible resin
Works with any type of DLP or LED/LCD 3D printer
- Compatible with natural dental aesthetics (A1, B1 shades)
- Exceptional breakage and high wear resistance for daily usage
- Almost as durable as PMMA in Inlay, Onlay and Crown-Bridge applications
- Low viscosity and easy to clean
- Perfectly compatible with syringe composites
Material Properties
Value
Standard
Tensile strength
66.5 MPa
ASTM D638
Flexural strength
126 MPa
ASTM D790-02
Flexural modulus
2980 MPa
ASTM D790-02
Shore Hardness
85.7
ASTM D2240
Density
1.14 g/cm3 at 23oC
ASTM D1475
Viscosity
2500 - 3000 mPa.s at 23oC
DIN 53211-4
Color
Light (A1, B1) and Medium (A2, A3)
Printer Settings (Click Here)
*Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C). *Do not forget shaking the resin well before use. *If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.