Exocad Training - Smile Design and Snap On      The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 2 May 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

The Ultimate 3-Day Crash Course in Dental 3D Printing and Digital Design Sydney's premier dental 3D printing course is back again, and even more comprehensive than ever before, with now 3 day's worth of hands-on printing and digital design education. Learn how to integrate additive 3D printing technologies into your practice safely, efficiently and effectively! This course is designed for 'zero' experienced dentists, so that attendees with zero prior printing and design knowledge will be able to design and print all fundamental applications possible in general dentistry when they return to their practices.   The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Curriculum  (DAY 1) 9 May 2025 (Friday) 9AM - 5PM 3D printers – an overview:      •Types of 3D printing technology       •Factors to consider when investing into 3D printing       •Design – in-house or outsource?      •What can we 3D print? The armamentarium:      •Printers       •Wash units       •Cure units       •The importance of validated protocols and the TGA Models:      •Basic model preparation for 3D printing – Medit Model app       •Nesting – positioning, angulation and supports Physical printing workflow:      •Printer set up       •Loading resin      •Washing      •Curing      •Material handling Print failures:      •Common failures       •What to do when there is a failure   (DAY 2) 10 May 2025 (Saturday) 9AM - 5PM 3D printed restorations – an overview:       •The case for 3D printed   restorations       •The physical properties of 3D   printed restorations      •Temporary vs Permanent – what   should I tell my patient? Design – the single crown:       •Live demo and hands-on exercise –   Medit ClinicCAD       •Live demo and hands-on exercise –   Dentbird AI      •Demo – Exocad Design – multi-unit bridge:      •Live demo and hands-on exercise –   Medit ClinicCAD     Design – 3DFreeForm (indirect palatal shells):      •Live demo and hands-on exercise –   MeditClinicCAD     Design – full dentures:      •Demo – Blue Sky Plan Design – injection moulding trays      •Live demo and hands-on exercise –   Medit ClinicCAD      Nesting and slicing:      •Proper orientation and supports   Post-print processing workflow:      •Washing      •Curing      •Polishing and/or characterization   (DAY 3) 11 May 2025 (Sunday) 9AM - 5PM Same-day splints:       •Live demo – from scan to design to print       •Hands-on exercise – splint design – Medit Splints       •Printing materials and considerations      •Post-processing Mouthguards:      •Why printed mouthguards      •Hands-on exercise – mouthguard design – Medit Design       •Printing considerations In-house clear aligners:      •Why in-house aligners       •Basic overview, workflow and practical considerations       •Design – who does what Guided surgery:      •Pro’s and Con’s of guided surgery       •What information do you need      •Settings – what do all these parameters mean?      •3D printing considerations – orientation, supports and post-print processing The single implant:      •Live demo and hands-on exercise – immediate extraction and surgical guide design – Blue Sky Plan       •Live demo – implant planning, surgical guide design and provisional restoration – Exoplan and ExocadImplant provisionalization:       •Live demo and hands-on exercise – Maryland bridge      •Live demo and hands-on exercise – nesbit/flipper   Course Details 9 - 12 May 2025  (FRI - SUN) 9AM - 5PM 7 CPD hours each / Total 21 CPD CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST each module (1 day) AUD 3,000 + GST for all modules (3 days) AUD 500 + GST for Additional Associate Dentist (or Auxiliary Staff) each module AUD 200 + GST for Lecture Retake each module Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience***    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Exocad Training - Crown and Bridge Considering Manufacturing Process     The Trainer: Mr. Sam Dias (Independent Certified Exocad Trainer) Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Laboratory. He then continued on to further complete his Advanced Diploma of Dental Prosthetics in 2010, followed by opening up his first Dental Practice in Sydney. After continuing to practice both within the Dental Surgery and the Dental Laboratory, he opened a second dental practice in 2013. Two years later he opened a third dental practice followed by opening his fourth in 2017. During this time, Sam has continued to further his knowledge within all areas of dentistry by travelling the world completing courses and searching for innovative ideas. He has continued to build his businesses around the latest dental technologies, whilst gaining knowledge and experience in using the cutting edge products and procedures. Sam now runs courses and lectures on the products he uses and the techniques he has developed. Sam is well-known and respected within his local communities for being a passionate, genuine and caring practitioner whilst also being a dedicated and hard working business owner. Course Curriculum  to be announced    Course Details 13 June 2025 (Friday) 9AM - 5PM 7 CPD hours  CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST per person  Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less

Single Unit Printed and Milled - Single and Ready to Mingle Swipe Right on In-House Indirect Dental Restorations! It’s a big ocean out there and everyone’s looking for their fish. Calling out all you dental pros who know the struggle of getting indirect single-unit restorations right! Are you tired of dealing with outdated methods and longing for some real precision in your life? Well, honey, it’s time to ditch the drama and upgrade your game!"Single and Ready to Mingle" is your match made in dental heaven and is the first event for a reinvigorated Bread and Butter Digital Dentistry Study Club – a sassy, hands-on educational program where milling and 3D printing come together to create the perfect restoration every time.   What’s in it for You? Flawless Workflow: Learn how to mill and print like a pro—no ghosting, no excuses. Swipe-Worthy Results: Create single-unit restorations so stunning with simple and replicable staining techniques, they’ll have your patients smiling ear-to-ear. Tech with Benefits: Get cozy with the latest gadgets and software that make your job easier (and way more fun). We’ve got the tools, the tech, and the vibes. All we’re missing is you! Get ready to mill, print, stain and glaze darlings! Who’s Invited? Dentists, lab techs, and anyone in the dental world who wants to level up their skills and have a little fun while doing it. Don’t ghost us—RSVP today! The Speaker: Dr. Andrew Ip BDS, MRACDS (GDP), Grad Dip Orthodontics (JCU), MSc Implantology (IMC), PGrad Dip Digital Dentistry (IDDA) Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022.Nerd, geek, freak - he's been called it all.What was once a simple hobby now takes up a significant portion of his daily work.Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies   Course Curriculum  Introduction to in-house CAD/CAM Hardware,   software and materials Advantages, disadvantages and considerations Crash course on milled restorative materials Wet   vs dry milling Non-fired materials Fired materials Crash course on 3D printed restorative materials Indications   and limitations Print considerations and workflow Design – hands-on with crowns, onlays and inlays Medit   ClinicCAD Dentbird AI Exocad Post-processing Polishing   vs staining – demo Staining an anterior crown – hands-on Staining a posterior tooth – hands-on Polishing a posterior crown – hands-on   Course Details 13 June 2025  (Sunday) 9AM - 5PM 7 CPD hours each / Total 21 CPD CM MEDICAL Office  Unit 10F / 16 Mars Road, Lane Cove West, NSW 2066 Please use Google Map link to find us (https://maps.app.goo.gl/xX8bKHAwvSTjgWqRA) Lunch and refreshments will be provided   Course fee AUD 1,100 + GST each module (1 day) AUD 500 + GST for Additional Associate Dentist (or Auxiliary Staff) each module AUD 200 + GST for Lecture Retake each module Early Bird Discount 10% (Discount will be applied when you check out.)    Registration  Please purchase this item from our website Please use official name for the certificate purpose when you check out     Important Laptop PC (Windows OS) required for all attendees. The powerful pc would be recommended.   All software should be installed before the course.  Seats are limited for better hands on experience***    Any inquiry  Please contact us if you have any questions. info@cm-medical.com.au Kevin Park 0427 466 588     

Read more less