Description
CE certified Class IIa biocompatible resin
Works with any type of DLP or LED/LCD 3D printer
- Compatible with natural dental aesthetics (A1, B1 shades)
- Exceptional breakage and high wear resistance for daily usage
- Almost as durable as PMMA in Inlay, Onlay and Crown-Bridge applications
- Low viscosity and easy to clean
- Perfectly compatible with syringe composites
| Material Properties |
Value |
Standard |
| Tensile strength |
66.5 MPa |
ASTM D638 |
| Flexural strength |
126 MPa |
ASTM D790-02 |
| Flexural modulus |
2980 MPa |
ASTM D790-02 |
| Shore Hardness |
85.7 |
ASTM D2240 |
| Density |
1.14 g/cm3 at 23oC |
ASTM D1475 |
| Viscosity |
2500 - 3000 mPa.s at 23oC |
DIN 53211-4 |
| Color |
Light (A1, B1) and Medium (A2, A3) |
|
*Store the PowerResins Temp bottle in dark and moisture free place at room temperature (20-24 °C). *Do not forget shaking the resin well before use. *If your printer has heater, you can set the temperature at 32 °C. Otherwise, you can heat your resin in a microwave for 18 seconds or by submerging in hot water for 15-20 minutes.
