Description
Rodin® Universal Resin Cleaner
Rodin® Universal Resin Cleaner is a clear, low-viscosity solution designed to safely and efficiently remove uncured UV photopolymer resin from 3D-printed objects. Engineered for true universal compatibility, it delivers exceptional performance with both ceramic-filled and conventional 3D resins, making it the go-to choice for dental clinics and laboratories. Unlike isopropyl alcohol (IPA), this nonflammable, low-odor cleaner eliminates harmful fumes, creating a safer and more comfortable workspace.
With cleaning power equal to IPA, Rodin® Universal Resin Cleaner holds nearly twice the uncured resin before reaching saturation, reducing waste and eliminating the need for frequent filtering. Its slow evaporation rate minimizes solvent loss, making it ideal for open bath systems, while seamless compatibility with 3D print cleaning stations ensures thorough resin removal, enhancing print quality and mechanical properties.
Key Features
-
Universal Compatibility: Excels with ceramic-filled and conventional resins across DLP, LCD, and SLA 3D resin technologies. Leaves behind a matte, chalk-free surface.
-
Safer Alternative: IPA-free, nonflammable, biodegradable, and low-odor for a healthier work environment.
-
High-Capacity Performance: Matches IPA’s cleaning strength while holding nearly double the resin load before saturation.
-
Cost-Efficient Design: Slow evaporation extends usability in open bath systems, reducing solvent waste.
-
Ultrasonic Integration: Enhances cleaning efficiency and integrates effortlessly into workflows with existing dental lab equipment.
Compatibility
Ceramic-Filled Resins
Non Ceramic-Filled Resins
Recommended Workflow
 |
1. Remove Excess Resin
Blow off any residual resin from the printed object using compressed air.
|
 |
2. Prewash
Place the object in a turbulent wash bath or ultrasonic bath filled with Universal Resin Cleaner.
-
Small objects (crowns, bridges, veneers): 1 minute
-
Large objects (dentures, aligners, full-arch prosthetics): 3 minutes
|
 |
3. Secondary Cleaning
-
Ceramic-filled resins: Use a clean brush dipped in fresh Universal Resin Cleaner and scrub the entire surface of the print.
-
Non-ceramic resins: Transfer the object into a new wash bath or ultrasonic bath with fresh Universal Resin Cleaner for 5 minutes, then rinse thoroughly with clean water.
|
 |
4. Dry
Blow the object dry with compressed air to remove any remaining wash solution or water.
|
 |
5. Inspect
Check the surface for sheen spots. If sheen remains, repeat the Prewash and Secondary Cleaning steps.
|
 |
6. Cure
Once the surface is completely clean and free of sheen, proceed with the curing process.
|
Guides / Downloads
